Home | Industries | Medical Technology
Pressure Test Stands For
Medical Components
Medical component test rigs by Poppe + Potthoff Maschinenbau put all sorts of components in the medical device manufacturing industry to the test. Reliable, repeatable, and exact pressure tests ensure quality during R&D, but also offer an ideal end-of-line solution to ensure components meet every necessary medical testing standard. All sorts of pressure tests are required for components in medical devices and components. Poppe + Potthoff has specialized to provide state-of-the-art leak tests, life cycle tests, and more to help component developers strive.
Nitrogen (N) Charging Unit
The PPM nitrogen charger (PPM NCU/HA/35/400) is intended for filling large accumulator systems such as bladder, membrane and piston accumulators.
Compressed Air Booster
Our compressed air booster units are utilized where the existing compressed air supply is no longer sufficient due to an increased pressure requirement for special tools, machines or systems.
Pipe and Hose Test Bench
Hoses, pipes and pipe connections must reliably withstand operational pressures and predefined pressures during testing. To prove the component and material quality, they are exposed to pressure, sometimes to the point of failure or bursting.
Burst and Pressure Cycle Test Stand
A state-of-the-art dual chamber test rig for simultaneous burst and pressure pulsation testing. The rig enables testing flexibility in your lab. A media heating and cooling unit can be installed to cover an even wider range of test requirements.
Standard Pressure Cycle Test Rig 500 / 1000 / 2000 bar
The standard pressure cycle test bench serves as the basis for many of our systems and can be upgraded with a wide variety of configurations.
Leak Test Rig for Medical Components
The leak test stand is powered by an air compressor (1:2) and uses nitrogen or air as the test medium. The test bench reaches up to 40 bar and is ideal for testing specific sensors or valves.
Test Stand for Pumps, Fittings and Valves
The rig enables leak and burst pressure testing up to 60 bar using our patented fine pressure control method with 0.1 bar increments. It facilitates a reliable and repeatable test process for comparable results and data acquisition to understand the DUT behaviour in operation.
Burst Test Stand up to 2 000 bar
Media-carrying components are exposed to a wide variety of conditions in building services and other industries. The resilience of pumps, pressure vessels, hoses and pipelines made of metal or plastic is verified with this rig by applying dynamic and static pressure tests to the component.
Multipurpose Leak Test Rig
Depending on the requirement, the test pressure is generated with a pressure pump, our patented fine pressure control method, or via a pneumatic or hydraulic pressure intensifier. A leak is automatically detected and registered in the system. The low-pressure systems have been specially developed for low-pressure, vacuum, air or nitrogen tests.
Burst Test Stand up to 200 bar
In order to prove the quality of media-carrying components, hose lines, pipes, pressure vessels and many other components are pressurized until they burst. The rig can be equipped with a simple pump solution or a high-tech hydraulic intensifier.
BOOK AN INDIVIDUAL CONSULTATION
WITH A DEDICATED SALES ENGINEER
Our experienced technical sales team will help you with the implementation of your project and will find a solution tailored to your specifications and your requirements. We are represented internationally and can support you and your company worldwide. Our team has completed hundreds of projects many of which involved supporting test facilities with identical equipment. P+P Maschinenbau is your internationally trusted partner.